top of page

After a Wildfire: What to Check Before You Turn the Water Back On

Writer: Asher
Asher
37 minutes ago
3 min read

Before you turn the water back on after a wildfire or evacuation, find out whether your water utility has issued a do-not-drink or boil notice, look for damaged pipes and fixtures, and make sure the gas is safe. Fire and heat can damage plumbing in ways you cannot always see, and contaminated water can enter a damaged system.

The 5-minute version 1. Check the water notice. Follow your utility's instructions before drinking or cooking with the water. 2. Smell for gas. If you smell gas, leave and call SoCalGas at 1-800-427-2200 or 911. 3. Look first. Check for melted, cracked or burned pipes and fixtures. 4. Turn the water on slowly. Watch for leaks at the meter and inside. 5. Call a plumber. Have the system checked before regular use.

1. Find out if your water is safe

After wildfires, water utilities may issue notices telling customers not to drink or boil the water, and in some fires they have found contamination in damaged water systems. Check with your water utility, such as LADWP in the City of Los Angeles at 1-800-342-5397, and follow the notice. Do not assume that clear water is safe.

2. Check for gas

If you smell gas, do not use switches, phones or flames. Leave the house and call SoCalGas at 1-800-427-2200 or 911. If the gas has been shut off, do not turn it back on yourself. SoCalGas or a licensed plumber should do it after checking the system. See gas leak detection.

3. Look for visible damage

Before you turn the water on, walk the house and the yard and look for:

  • Melted or warped plastic pipes and fittings

  • Cracked, discolored or burned supply lines

  • Damaged hose bibs, meters and shutoff valves

  • A damaged water heater, vent or gas connection

  • Ash or debris around the meter box and cleanouts

4. Turn the water on slowly

If the water is cleared for use, open the main valve slowly. Walk through the house and look for leaks, wet spots and the sound of running water. Check the meter: if the dial moves when everything is off, there is a leak. See water leak detection.

5. Check the water heater

Heat and smoke can damage a water heater, its vent and its gas connection. Have it checked before using it. See water heater repair.

6. Think about the sewer

Fire, heavy equipment and debris can damage sewer lines and cleanouts. If drains are slow or smell after you return, get a sewer camera inspection.

7. Watch for rain afterward

Burned hillsides can send mud and debris downhill when it rains. Have your drains, sump pump and cleanouts ready. See sump pump services.

8. Keep records

Take photos and keep invoices for insurance claims.

Questions we hear

Is it safe to drink the water after a fire?

Only if your water utility says so. Follow its notice.

Should I replace my water heater or pipes after a fire?

Not necessarily, but they should be inspected. Smoke, heat or contamination may call for repairs or replacement.

Who do I call first?

Call your utility for water and gas notices, then a licensed plumber to inspect the system.

Back home and not sure what is safe? Call or text Boss Plumbing at (323) 464-4700. We are open 24 hours and we are the quickest plumber to reach you in Los Angeles. See emergency plumbing.

 
 
 

Comments


© 2026 Boss Plumbing. All rights reserved. License #579704

Boss Plumbing & Heating logo

Family owned and operated for over 37 years. Your trusted Los Angeles plumbing experts for residential and commercial services.

  • Boss Plumbing on Instagram
  • Boss Plumbing on X
  • Boss Plumbing on Pinterest
  • Boss Plumbing on YouTube

Contact Us

826 Seward St, Los Angeles, CA 90038

bottom of page