top of page

Do You Need a Permit to Replace a Water Heater in Los Angeles?

Writer: Asher
Asher
2 hours ago
3 min read

Yes. Replacing a water heater in the City of Los Angeles requires a plumbing permit from the Los Angeles Department of Building and Safety (LADBS), and the new heater has to be inspected. A permit is not just paperwork: it is how the city confirms the gas, venting, bracing and safety valves are done correctly.

The 5-minute version 1. Permit required. Replacing a water heater in the City of LA needs a plumbing permit from LADBS. 2. Inspection. The work is inspected after installation. 3. Bracing. California requires water heaters to be braced against earthquakes. 4. Who pulls it. A licensed plumbing contractor can pull the permit. Ask your plumber who does. 5. Other cities differ. Santa Monica, Beverly Hills, Burbank, Culver City and Glendale each run their own building departments.

What the permit is for

A water heater has a gas line or a high-power electric circuit, a vent for exhaust, a temperature and pressure relief valve and a drain line. If any of those are wrong, the heater can leak, leak gas, back-draft exhaust into the house or fall over in an earthquake. The permit and inspection exist so a second set of eyes checks those things.

What the inspector looks at

  • Earthquake bracing. California requires water heaters to be strapped to the wall, with straps in the upper and lower thirds of the tank.

  • Gas connection and shutoff. The line should have a shutoff valve and a proper flexible connector, and it should be tested for leaks.

  • Venting. A gas water heater needs a vent that carries exhaust outside, and enough combustion air in the room.

  • Temperature and pressure relief valve. The discharge pipe needs to run to a safe place.

  • Expansion control. Many homes need an expansion tank.

What happens if there is no permit

Unpermitted work can cause problems when you sell the house, and an inspector or buyer may require it to be corrected. If something goes wrong, your homeowner's insurance company may ask whether the work was permitted. It is also the only way to know the gas work was checked.

Who pulls the permit

A licensed plumbing contractor normally pulls the permit as part of the job, and you should ask any plumber you are considering whether it is included. You can read about how to check a plumber's license before you hire. Boss Plumbing holds C-36 plumbing and C-42 sanitation licenses; see our license information.

What about the rest of the Los Angeles area

Los Angeles is a patchwork of cities. The City of Los Angeles uses LADBS, but Santa Monica, Beverly Hills, Burbank, Culver City, Glendale and other cities each have their own building department and their own permit process. If you live in one of those cities, the plumber should pull the permit from your city.

Related guides

Questions we hear

Do I need a permit to repair a water heater?

Small repairs, such as replacing a thermocouple or a relief valve, generally do not require one, but replacing the whole heater does. Ask the plumber.

Do I need a permit for a tankless water heater?

Yes. Switching to tankless usually changes the gas line size and the venting, so it needs a permit and inspection.

Can I replace it myself?

California law lets homeowners do some work on their own property, but gas and venting mistakes are dangerous, and the work still needs a permit and inspection.

Need a water heater replaced? Call or text Boss Plumbing at (323) 464-4700. We are open 24 hours and we are the quickest plumber to reach you in Los Angeles.

 
 
 

Comments


© 2026 Boss Plumbing. All rights reserved. License #579704

Boss Plumbing & Heating logo

Family owned and operated for over 37 years. Your trusted Los Angeles plumbing experts for residential and commercial services.

  • Boss Plumbing on Instagram
  • Boss Plumbing on X
  • Boss Plumbing on Pinterest
  • Boss Plumbing on YouTube

Contact Us

826 Seward St, Los Angeles, CA 90038

bottom of page